UGREEN SATA 3 Data Cable 0.5m | High-Speed SATA III 6Gbps Cable | Black | 30796

UGREEN SATA 3 Data Cable 0.5m | High-Speed SATA III 6Gbps Cable | Black | 30796

The UGREEN SATA 3 Data Cable 0.5m is designed to provide a reliable high-speed data connection between compatible SATA storage devices and a computer motherboard or SATA controller. With support for the SATA III interface up to 6Gbps, this cable is suitable for connecting internal 2.5-inch and 3.5-inch HDDs, SSDs, optical drives, and other compatible SATA devices. With a compact 0.5-meter length, the cable provides sufficient reach for most desktop PC builds while helping maintain a clean and organized internal setup. It is ideal for PC upgrades, custom builds, storage replacements, system maintenance, and IT servicing. The UGREEN SATA 3 Data Cable provides a direct SATA data connection between a compatible storage drive and a motherboard or SATA controller. It supports SATA III data transfer rates of up to 6Gbps, while also maintaining compatibility with earlier SATA generations. The cable is suitable for connecting SATA HDDs, SATA SSDs, optical drives, and other compatible SATA devices inside desktop computers and compatible systems. Its 0.5-meter length offers a practical balance between flexibility and cable management.

Key Features

• SATA III 6Gbps Support: Supports SATA III data transfer speeds of up to 6Gbps under compatible conditions.
• High-Speed Data Transmission: Designed for fast and reliable data communication between SATA storage devices and compatible host controllers.
• Wide SATA Compatibility: Suitable for compatible SATA I, SATA II, and SATA III devices.
• Standard SATA Connectors: Designed for connecting compatible SATA drives to motherboard SATA ports or SATA controllers.
• 0.5-Meter Length: Provides convenient reach inside desktop PC cases while helping minimize unnecessary cable clutter.
• HDD & SSD Support: Compatible with SATA-based 2.5-inch and 3.5-inch hard drives and solid-state drives.
• Optical Drive Support: Suitable for compatible SATA DVD and Blu-ray drives.
• Plug & Play: No special software or drivers are required for the cable itself.
• Backward Compatible: Can operate with earlier SATA interface generations, subject to their respective speed limitations.
• Black Finish: Provides a clean appearance for desktop PC builds and internal cable management.

Technical Specifications

• Brand: UGREEN
• Product Type: SATA 3 Data Cable
• Interface: SATA III
• Maximum Interface Speed: Up to 6Gbps
• Connector Type: SATA Data Male to SATA Data Male
• Cable Length: 0.5 Meter
• Compatible Devices: SATA HDDs, SATA SSDs, optical drives, and other compatible SATA devices
• Compatibility: SATA I / SATA II / SATA III
• Installation: Plug & Play
• Color: Black

Ideal Applications

• Connecting internal SATA SSDs to desktop motherboards.
• Connecting 2.5-inch SATA SSDs and HDDs.
• Connecting 3.5-inch SATA hard drives.
• Installing SATA optical drives.
• Desktop PC upgrades and custom builds.
• Adding additional internal storage to compatible computers.
• Replacing damaged or missing SATA data cables.
• PC repair and maintenance.
• IT technician and system-builder applications.
• Improving internal PC cable management with a practical 0.5m length.

Why Choose UGREEN SATA 3 Data Cable

• High-Speed SATA III: Supports up to 6Gbps interface bandwidth for compatible SATA III systems.
• Broad Compatibility: Works with SATA I, SATA II, and SATA III devices.
• Suitable for HDD & SSD: Supports a wide range of internal SATA storage devices.
• Practical 0.5m Length: Provides convenient reach for most desktop PC installations.
• Easy Installation: Simple SATA connection without additional drivers or software.
• Versatile Use: Suitable for PC assembly, upgrades, repairs, storage expansion, and IT maintenance.
• Clean Cable Management: Compact length helps reduce unnecessary cable slack inside the PC case.

How to Use

1. Power off the computer and disconnect it from the electrical supply.
2. Locate an available SATA data port on the motherboard or SATA controller.
3. Connect one end of the UGREEN SATA cable to the motherboard or controller.
4. Connect the other end to the SATA data connector on the HDD, SSD, or optical drive.
5. Connect the appropriate SATA power cable to the storage device from the PC power supply.
6. Close the computer case, reconnect power, and start the system.
7. Initialize, partition, or format a newly installed drive through the operating system if required.

SATA III 6Gbps Performance

The cable supports the SATA III interface with a theoretical maximum link speed of 6Gbps. This makes it suitable for modern SATA SSDs and high-performance SATA hard drives when used with a compatible SATA III motherboard or controller.

The 6Gbps figure represents the maximum SATA interface link rate and does not mean that every connected storage device will transfer data at 6Gbps. Actual storage performance depends on the SSD or HDD, SATA controller, motherboard, firmware, operating system, workload, and other system components.

Backward Compatibility

SATA is designed with backward compatibility between generations. The UGREEN SATA 3 cable can be used with compatible SATA I and SATA II devices, but the actual link speed will be limited by the capabilities of the connected storage device and SATA controller.

For example, connecting a SATA III SSD to a SATA II controller will not provide SATA III performance because the controller establishes the connection according to the supported interface generation.

HDD & SSD Compatibility

The cable is suitable for compatible internal 2.5-inch and 3.5-inch SATA HDDs and SSDs. It can also be used with compatible SATA optical drives such as DVD and Blu-ray drives.

Please note that the SATA data cable carries data signals only. A separate compatible SATA power connection is required to provide electrical power to the connected storage device.

Cable Management

The 0.5-meter length is suitable for most desktop PC cases and provides enough flexibility for routing the cable between the motherboard and storage device. Its compact length can help reduce excess cable slack and keep the internal PC environment organized.

For optimal airflow and maintenance access, route the cable away from fans and other moving components and avoid excessive bending or tension at the connectors.

Compatibility Note

This product is a SATA data cable and is not a SATA power cable. The connected drive must receive power separately from a compatible power supply or power source.

The cable is intended for compatible internal SATA connections. It does not convert SATA to USB, PCIe/NVMe, IDE/PATA, SAS, or other storage interfaces.

Before installation, verify that both the motherboard/controller and storage device use standard compatible SATA data connectors.

Package Contents

• 1 × UGREEN SATA 3 Data Cable 0.5m – Black

Why Buy from IT Splendid (UAE)

• UAE Delivery: Available across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain, and other Emirates.
• Storage Accessories: Shop SATA cables, SSDs, HDDs, NVMe enclosures, hard drive enclosures, adapters, and storage accessories.
• PC Components: Suitable for desktop upgrades, custom PC builds, repairs, and system maintenance.
• IT Accessories: Find computer cables, adapters, hubs, networking accessories, peripherals, and other technology products.
• Professional Support: Assistance with storage connectivity, PC components, cables, accessories, and compatible technology solutions.
• Complete Technology Solutions: IT Splendid offers computers, laptops, storage, networking equipment, gaming products, peripherals, cables, accessories, and office technology.

The UGREEN SATA 3 Data Cable 0.5m is a practical solution for connecting compatible internal SATA storage devices to a desktop motherboard or SATA controller. With SATA III 6Gbps support, compatibility with SATA I/II/III devices, a convenient 0.5-meter length, and a straightforward plug-and-play design, it is ideal for PC upgrades, custom builds, repairs, storage expansion, and everyday IT maintenance.